Lightning Rods

Lightning Rods

View as Grid List
Sort by
Display per page

Longacre Quick Release Hub

Hex Hub - push button release Welds to 3/4" steering shaft Aluminum hub Includes a second safety groove 3 Mounting holes – 5/16" on a 1-3/4" bolt circle (hole distance 1-1/2" center-to-center)
£32.50 excl vat

Joes Racing Quick Release Hub

Made from aircraft aluminum, JOES quick disconnects are pin-less and spring-loaded for fast steering wheel removal. The splined steel coupling is bored to slip over a 3/4" steering column. Fits industry standard large 3 hole pattern. 3x 5/16" on a 1-3/4" Bolt Circle.
£60.00 excl vat

Longacre Ignition and Start Switch

1 SWITCH DOES IT ALL! DOWN is off MIDDLE is Ignition On UP is momentary start Comes pre-wired with color coded harness, flip up switch cover. Simple to install.
£27.09 excl vat

Battery Isolator Switch

The On/Off switch is a twin contact battery isolation switch that will ensure complete electrical isolation of the vehicle when it is switched off, so it cannot be re-started.
£8.33 excl vat

Lucas Style Battery Isolator Switch

This Lucas style battery cut out switch is made in the same `Lucas` style as the switch that has been used by generations. A twin terminal design with a ceramic base, metal body and T-bar style switch.
£10.42 excl vat

TIM Capillary Water Temperature Guage

A TIM 52mm diameter mechanical water temperature gauge, with a black dial face ranging from 40-120 degrees C and a white back light. Includes 5/8" UNF male fitting and 6 ft capillary tube.
£30.00 excl vat

Tim Capillary Oil Pressure Guage

A Classic TIM capillary oil pressure gauge, with a black dial face ranging from 0-100 Psi and a white back light. Includes a 6 foot long capillary pipe and fittings at 1/8" NPT.
£30.00 excl vat

Otto Racing TX1 Digital Recall Tacho

Compact Digital Tacho with Maximum RPM recall Battery Voltage Readout 100% Waterproof
£79.00 excl vat

Stainless Steel Sliding Bonnet Pin Kit

These Competition Quick Release Steel Bonnet Pins feature captive slide pins and 7/16" UNF shank thread. Sold In Pairs.
£7.23 excl vat

Mintex MDB1175M1144 Sierra Brake Pads

In our opinion the best compound pad for Lightning Rods and 2.0 Hot Rods. These are for 2.0 Sierra Calipers
£50.00 excl vat

Castrol React Performance Brake Fluid

Castrol Response DOT 4 brake fluid is specially formulated to meet the demanding requirements of modern high performance brake and clutch systems with the exception of vehicles with mineral oil systems. Castrol Response has a boiling point of 265 degrees celcius which enables the fluid to operate at a high level throughout its service life, offering system protection together with ultimate braking confidence. It is recommended that the brake fluid is to be changed every two years to optimise braking performance.
£9.95 excl vat

Facet Red Top Cylindrical Fuel Pump

Facet 480532 Red Top Cylindrical Fuel Pump - RTW506 Specification:- Competition Pump:- 480532E Voltage:- 12v Earth:- Neg Pressure (Psi):- 6.0-8.0 Flow:- US Gallons/Hr 40 Dry Prime Height in Mtrs:- 0.6 Thread Size:- 1/4 npt Operating Temperature:- -40º to +180° F (all Models) Average Run Time or MTBF:- 6000 hrs Legal Requirements:- Certified & Complies With EEC 95/54 Requirements Length:-140mm Diameter:- 54mm Weight:-0.7kg Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal
£65.00 excl vat

Malpassi 67mm Filter King With Alloy Bowl 8mm Unions

These fuel pressure regulators have been part of a competition fuel system, and a common sight on motorsport vehicles over the past 25 years. The FILTER KING is a popular unit, regularly seen in the motorsport field because of its ability to regulate and filter fuel without restriction. Height:- 120mm Width:- 100mm Weight:- 370 gms Filter Micron:- 10 Unions:- 8mm Pressure Range:- 1-7 psi
£40.00 excl vat

8mm Stainless Steel Braided Fuel Hose

Priced per metre
£7.50 excl vat

Race Receiver

Race receivers enable the steward of the meeting to be in contact with all drivers at all times and have been proven to assist with the safe and effective running of a meeting and races and the ORC are hoping that the introduction of these are seen as a major step forward by the Oval Racing Council. A race receiver is an important piece of safety equipment like your helmet and overalls and it will be compulsory for drivers to have a working race receiver during a race – failure to have one will see you not being allowed to race.
£79.17 excl vat

7x13 Lightning Rod

7x13 Wheel for the front of aSierra Lightning Rod - 122mm backspace - takes standard wheel nuts
£70.84 excl vat

7x13 Lightning Rod/Brisca F2

7x13 Wheel for the rear of a Sierra Lightning Rod - 105mm backspace - takes standard wheel nuts. Also used on the rear of Brisca F2 Stock Cars on shale
£70.84 excl vat

ALLSTAR MESH WINDOW NET

£25.00 excl vat