Oval Racing

Castrol B373 designed for use in Limited Slip Diffs

Made from aircraft aluminum, JOES quick disconnects are pin-less and spring-loaded for fast steering wheel removal. The splined steel coupling is bored to slip over a 3/4" steering column. Fits industry standard large 3 hole pattern. 3x 5/16" on a 1-3/4" Bolt Circle.

1 SWITCH DOES IT ALL! DOWN is off MIDDLE is Ignition On UP is momentary start Comes pre-wired with color coded harness, flip up switch cover. Simple to install.

The On/Off switch is a twin contact battery isolation switch that will ensure complete electrical isolation of the vehicle when it is switched off, so it cannot be re-started.

This Lucas style battery cut out switch is made in the same `Lucas` style as the switch that has been used by generations. A twin terminal design with a ceramic base, metal body and T-bar style switch.

A TIM 52mm diameter mechanical water temperature gauge, with a black dial face ranging from 40-120 degrees C and a white back light. Includes 5/8" UNF male fitting and 6 ft capillary tube.

A Classic TIM capillary oil pressure gauge, with a black dial face ranging from 0-100 Psi and a white back light. Includes a 6 foot long capillary pipe and fittings at 1/8" NPT.

Compact Digital Tacho with Maximum RPM recall Battery Voltage Readout 100% Waterproof

These Competition Quick Release Steel Bonnet Pins feature captive slide pins and 7/16" UNF shank thread. Sold In Pairs.

Castrol Response DOT 4 brake fluid is specially formulated to meet the demanding requirements of modern high performance brake and clutch systems with the exception of vehicles with mineral oil systems. Castrol Response has a boiling point of 265 degrees celcius which enables the fluid to operate at a high level throughout its service life, offering system protection together with ultimate braking confidence. It is recommended that the brake fluid is to be changed every two years to optimise braking performance.

These solid-state technology electronic fuel pumps provide outputs up to 132.5 liters/hour and .68 bar. Facet/Purolator Cube Fuel Pumps are self-priming with a dry lift capacity of 120 inches. Two universal models provide complete coverage for all low and high-pressure carburetor applications for cars, vans, RV’s, and light trucks, in addition to many diesel applications. All models of the Facet/Purolator Cube Fuel Pumps are compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives. Specification:- Fast Road Pump:- 40106 Voltage:- 12v Earth:- Neg Pressure (Psi):- 4.0-7.0 Flow:- US Gallons/Hr 32 Dry Prime Height in Mtrs:- 0.3 Thread Size:- 1/8th nptf Average Run Time or MTBF:- 6000 hrs Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal

Priced per metre

10" wide by 29.5" tip to tip. Please note shipping is to UK Mainland only, please call 01354 688111 to order for N Ireland

1850mm Long 105mm Wide 1.5mm Thick

Facet 480532 Red Top Cylindrical Fuel Pump - RTW506 Specification:- Competition Pump:- 480532E Voltage:- 12v Earth:- Neg Pressure (Psi):- 6.0-8.0 Flow:- US Gallons/Hr 40 Dry Prime Height in Mtrs:- 0.6 Thread Size:- 1/4 npt Operating Temperature:- -40º to +180° F (all Models) Average Run Time or MTBF:- 6000 hrs Legal Requirements:- Certified & Complies With EEC 95/54 Requirements Length:-140mm Diameter:- 54mm Weight:-0.7kg Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal

These fuel pressure regulators have been part of a competition fuel system, and a common sight on motorsport vehicles over the past 25 years. The FILTER KING is a popular unit, regularly seen in the motorsport field because of its ability to regulate and filter fuel without restriction. Height:- 120mm Width:- 100mm Weight:- 370 gms Filter Micron:- 10 Unions:- 8mm Pressure Range:- 1-7 psi