Classic Hot Rods/2.0 Hot Rods

2.0 Hot Rods

View as Grid List
Sort by
Display per page

3J Driveline Gear Kit - National Hot Rod Ratio's

Original ratio's for National Hot Rods, now mainly used in 2.0 Hot Rods and Classic Hot Rods. Ratio's = 1st-2.48, 2nd-1.69, 3rd-1.61
£1,100.00 excl vat

10x13 - Classic Hot Rod

Classic 4 spoke race wheel, 4x108, 100mm backspace. Uses standard wheel nuts
£185.00 excl vat

HANS only - TRS 75mm Magnum Harness - 6 Point - FIA Approved

FIA approved 75mm 6 point saloon harness with steel adjusters on the shoulder straps and lap straps. 50mm upper shoulder straps for use only with HANS device, eyebolts included. • FIA approved 8853/98 Saloon Harness • 6 point snap hook fixings • 75mm shoulder and lap straps • 50mm upper shoulder straps • Steel adjusters on lap and shoulders • HANS ONLY
£175.00 excl vat

TRS 75mm Magnum Harness - 6 Point - FIA Approved

FIA approved 75mm 6 point saloon harness. Suit saloon or GT car. Includes eyebolt's. • FIA approved 8853/98 Saloon Harness • 6 point snap hook fixings • 75mm shoulder and lap straps • Steel adjusters on lap and shoulders • HANS friendly
£175.00 excl vat

8x13 CXR - 2.0 Hot Rod

Available in 108mm and 146mm backspace. Anthracite Grey only
£162.50 excl vat

TRS 75mm (3") Nascar Harness - 5 Point - Superlite

The same as the standard 3" Nascar Harness but fitted with the Aluminium shoulder adjusters which are lighter and much smoother to adjust
£125.00 excl vat

Otto Racing TX1 Digital Recall Tacho

Compact Digital Tacho with Maximum RPM recall Battery Voltage Readout 100% Waterproof
£125.00 excl vat

Facet Red Top Cylindrical Fuel Pump & 90 Deg Unions

Facet 480532 Red Top Cylindrical Fuel Pump - RTW506 Specification:- Competition Pump:- 480532E Voltage:- 12v Earth:- Neg Pressure (Psi):- 6.0-8.0 Flow:- US Gallons/Hr 40 Dry Prime Height in Mtrs:- 0.6 Thread Size:- 1/4 npt Operating Temperature:- -40º to +180° F (all Models) Average Run Time or MTBF:- 6000 hrs Legal Requirements:- Certified & Complies With EEC 95/54 Requirements Length:-140mm Diameter:- 54mm Weight:-0.7kg Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal
£107.50 excl vat

Joes Racing Quick Release Hub

Made from aircraft aluminum, JOES quick disconnects are pin-less and spring-loaded for fast steering wheel removal. The splined steel coupling is bored to slip over a 3/4" steering column. Fits industry standard large 3 hole pattern. 3x 5/16" on a 1-3/4" Bolt Circle.
£82.50 excl vat

Ford English Small Diff Flange

Polleysport branded Ford English Small diff flange
£75.00 excl vat

Castrol React SRF Racing Brake Fluid

A direct replacement for the hugely popular SRF brake fluid, Castrol React SRF racing brake fluid is specially formulated to maximise braking performance in competition conditions. React SRF DOT 4 brake fluid has a very high boiling point of over 300 degrees celsius making this fluid ideal for even the most extreme conditions
£75.00 excl vat

Longacre Ignition and Start Switch

1 SWITCH DOES IT ALL! DOWN is off MIDDLE is Ignition On UP is momentary start Comes pre-wired with color coded harness, flip up switch cover. Simple to install.
£60.00 excl vat

Malpassi 67mm Filter King With Alloy Bowl 8mm Unions

These fuel pressure regulators have been part of a competition fuel system, and a common sight on motorsport vehicles over the past 25 years. The FILTER KING is a popular unit, regularly seen in the motorsport field because of its ability to regulate and filter fuel without restriction. Height:- 120mm Width:- 100mm Weight:- 370 gms Filter Micron:- 10 Unions:- 8mm Pressure Range:- 1-7 psi
£55.00 excl vat