Oval Racing

100mm Back space for use on the rear of Brisca F2 Stock Cars

102mm Back space for use on the rear of Brisca F2 Stock Cars

The On/Off switch is a twin contact battery isolation switch that will ensure complete electrical isolation of the vehicle when it is switched off, so it cannot be re-started.

Brisca stainless silencer

Castrol B373 designed for use in Limited Slip Diffs

Castrol Response DOT 4 brake fluid is specially formulated to meet the demanding requirements of modern high performance brake and clutch systems with the exception of vehicles with mineral oil systems. Castrol Response has a boiling point of 265 degrees celcius which enables the fluid to operate at a high level throughout its service life, offering system protection together with ultimate braking confidence. It is recommended that the brake fluid is to be changed every two years to optimise braking performance.

A direct replacement for the hugely popular SRF brake fluid, Castrol React SRF racing brake fluid is specially formulated to maximise braking performance in competition conditions. React SRF DOT 4 brake fluid has a very high boiling point of over 300 degrees celsius making this fluid ideal for even the most extreme conditions

These solid-state technology electronic fuel pumps provide outputs up to 132.5 liters/hour and .68 bar. Facet/Purolator Cube Fuel Pumps are self-priming with a dry lift capacity of 120 inches. Two universal models provide complete coverage for all low and high-pressure carburetor applications for cars, vans, RV’s, and light trucks, in addition to many diesel applications. All models of the Facet/Purolator Cube Fuel Pumps are compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives. Specification:- Fast Road Pump:- 40106 Voltage:- 12v Earth:- Neg Pressure (Psi):- 4.0-7.0 Flow:- US Gallons/Hr 32 Dry Prime Height in Mtrs:- 0.3 Thread Size:- 1/8th nptf Average Run Time or MTBF:- 6000 hrs Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal

Facet 480532 Red Top Cylindrical Fuel Pump - RTW506 Specification:- Competition Pump:- 480532E Voltage:- 12v Earth:- Neg Pressure (Psi):- 6.0-8.0 Flow:- US Gallons/Hr 40 Dry Prime Height in Mtrs:- 0.6 Thread Size:- 1/4 npt Operating Temperature:- -40º to +180° F (all Models) Average Run Time or MTBF:- 6000 hrs Legal Requirements:- Certified & Complies With EEC 95/54 Requirements Length:-140mm Diameter:- 54mm Weight:-0.7kg Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal

Polleysport branded Ford English Small diff flange

Aluminium bodied shock valved to our specifications for Brisca F2 Shale Racing

FIA approved 75mm 6 point saloon harness with steel adjusters on the shoulder straps and lap straps. 50mm upper shoulder straps for use only with HANS device, eyebolts included. • FIA approved 8853/98 Saloon Harness • 6 point snap hook fixings • 75mm shoulder and lap straps • 50mm upper shoulder straps • Steel adjusters on lap and shoulders • HANS ONLY