Stock Rods

The same as the standard 3" Nascar Harness but fitted with the Aluminium shoulder adjusters which are lighter and much smoother to adjust

FIA approved 75mm 6 point saloon harness. Suit saloon or GT car. Includes eyebolt's. • FIA approved 8853/98 Saloon Harness • 6 point snap hook fixings • 75mm shoulder and lap straps • Steel adjusters on lap and shoulders • HANS friendly

1850mm Long 105mm Wide 1.5mm Thick

These Competition Quick Release Steel Bonnet Pins feature captive slide pins and 7/16" UNF shank thread. Sold In Pairs.

Stock Rod/Lightning Rod silencer

Compact Digital Tacho with Maximum RPM recall Battery Voltage Readout 100% Waterproof

These fuel pressure regulators have been part of a competition fuel system, and a common sight on motorsport vehicles over the past 25 years. The FILTER KING is a popular unit, regularly seen in the motorsport field because of its ability to regulate and filter fuel without restriction. Height:- 120mm Width:- 100mm Weight:- 370 gms Filter Micron:- 10 Unions:- 8mm Pressure Range:- 1-7 psi

This Lucas style battery cut out switch is made in the same `Lucas` style as the switch that has been used by generations. A twin terminal design with a ceramic base, metal body and T-bar style switch.

1 SWITCH DOES IT ALL! DOWN is off MIDDLE is Ignition On UP is momentary start Comes pre-wired with color coded harness, flip up switch cover. Simple to install.

Made from aircraft aluminum, JOES quick disconnects are pin-less and spring-loaded for fast steering wheel removal. The splined steel coupling is bored to slip over a 3/4" steering column. Fits industry standard large 3 hole pattern. 3x 5/16" on a 1-3/4" Bolt Circle.

FIA approved 75mm 6 point saloon harness with steel adjusters on the shoulder straps and lap straps. 50mm upper shoulder straps for use only with HANS device, eyebolts included. • FIA approved 8853/98 Saloon Harness • 6 point snap hook fixings • 75mm shoulder and lap straps • 50mm upper shoulder straps • Steel adjusters on lap and shoulders • HANS ONLY

Facet 480532 Red Top Cylindrical Fuel Pump - RTW506 Specification:- Competition Pump:- 480532E Voltage:- 12v Earth:- Neg Pressure (Psi):- 6.0-8.0 Flow:- US Gallons/Hr 40 Dry Prime Height in Mtrs:- 0.6 Thread Size:- 1/4 npt Operating Temperature:- -40º to +180° F (all Models) Average Run Time or MTBF:- 6000 hrs Legal Requirements:- Certified & Complies With EEC 95/54 Requirements Length:-140mm Diameter:- 54mm Weight:-0.7kg Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal