Brisca F2/Superstox

2 Locknuts are included

Quick release hub allow easy installation and removal of three bolt style steering wheels, often used to ease the entering and exiting of vehicles. The splined steel coupling is bored to slip over a 3/4" steering column. Fits industry standard large 3 hole pattern. 3x 5/16" on a 1-3/4" Bolt Circle.

Made from aircraft aluminum, JOES quick disconnects are pin-less and spring-loaded for fast steering wheel removal. The splined steel coupling is bored to slip over a 3/4" steering column. Fits industry standard large 3 hole pattern. 3x 5/16" on a 1-3/4" Bolt Circle.

1 SWITCH DOES IT ALL! DOWN is off MIDDLE is Ignition On UP is momentary start Comes pre-wired with color coded harness, flip up switch cover. Simple to install.

The On/Off switch is a twin contact battery isolation switch that will ensure complete electrical isolation of the vehicle when it is switched off, so it cannot be re-started.

This Lucas style battery cut out switch is made in the same `Lucas` style as the switch that has been used by generations. A twin terminal design with a ceramic base, metal body and T-bar style switch.

A TIM 52mm diameter mechanical water temperature gauge, with a black dial face ranging from 40-120 degrees C and a white back light. Includes 5/8" UNF male fitting and 6 ft capillary tube.

A Classic TIM capillary oil pressure gauge, with a black dial face ranging from 0-100 Psi and a white back light. Includes a 6 foot long capillary pipe and fittings at 1/8" NPT.

Compact Digital Tacho with Maximum RPM recall Battery Voltage Readout 100% Waterproof

These Competition Quick Release Steel Bonnet Pins feature captive slide pins and 7/16" UNF shank thread. Sold In Pairs.

Castrol Response DOT 4 brake fluid is specially formulated to meet the demanding requirements of modern high performance brake and clutch systems with the exception of vehicles with mineral oil systems. Castrol Response has a boiling point of 265 degrees celcius which enables the fluid to operate at a high level throughout its service life, offering system protection together with ultimate braking confidence. It is recommended that the brake fluid is to be changed every two years to optimise braking performance.

Facet 480532 Red Top Cylindrical Fuel Pump - RTW506 Specification:- Competition Pump:- 480532E Voltage:- 12v Earth:- Neg Pressure (Psi):- 6.0-8.0 Flow:- US Gallons/Hr 40 Dry Prime Height in Mtrs:- 0.6 Thread Size:- 1/4 npt Operating Temperature:- -40º to +180° F (all Models) Average Run Time or MTBF:- 6000 hrs Legal Requirements:- Certified & Complies With EEC 95/54 Requirements Length:-140mm Diameter:- 54mm Weight:-0.7kg Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal

Priced per metre

Aluminium bodied shock valved to our specifications for Brisca F2 Shale Racing